 |
 |
INFORMATION |
|
|
|
Please
click for
a larger image |
Make a clean cut with the - SR-45i
Whether you've been using oxyfuel and want to step up to plasma, or you need the right unit to tackle jobs like duct work and insulation, start with the SR-45i. Even if you never used plasma, you'll find it's simple to learn. You get 100% duty cycle, narrower kerf, less dross and more cuts. And it operates in four power supply modes, to cut anything from 1/2" mild steel to HVAC insulation. |
100% duty cycle makes more cuts
The 100% duty cycle means you won't lose time between cuts. The power supply and torch can run continuously without shutting down or overheating. And you'll spend less on replacement parts. The patented electrode lasts up to 4 hours - 2 times as long as any other. KALIBURN have also designed the power supply for easy installation, maintenance and trouble-shooting. |
Truer cuts on thin gauge metals
The SR-45i is especially adept at cutting sheet metal and HVAC insulation to shape. It gives you a smoother cut and squarer edge. Because it has a true constant current output - at full load there's a maximum of only 1.5% current ripple. When you buy the SR-45i, you're getting an economical plasma cutting system with the reliability, precision and performance you'd expect from KALIBURN. |
Clean cuts for insulation
|
IMAGE A
IMAGE B
|
Innovative design features
IMAGE A
The advancing tool pushes the used section of the electrode out.
IMAGE B
A quick, simple grinding operation restores the life of a consumed electrode and saves you money. |
SR-45i Specifications |
Power supply operates in 4 modes
1. Mechanized
2. Auto Restart
3. Expanded Metal
4. HVAC Insulation Cutting |
Power Supply
Output: 45 amps @ 175 volts D.C.
OCV: 235 Volts D.C.
Weight: 200lbs
Height: 35"
Width: 19"
Depth: 20" |
SR-45i System
*Switching regulated power supply
*Torch
*Torch leads (35ft or 50ft)
*Spare parts kit
*Air regulator
*10ft ground cable |
Torch
45 Amps air plasma
Gas Flow: 250 SCFH @ 70psi
Length: 12 1/2"
Diameter: 1 3/8"
Cutting Capacity: Gauge to 1/2" mild steel |
Primary Voltages
208V, 3 phase, 60Hz
220/240V, 1 and 3 phase, 60Hz
220/380V, 3 phase, 50Hz
415V, 3 phase, 50Hz
460V, 3 phase, 60Hz
575V, 3 phase, 60Hz |
If you need any further information about the SR-45i or would like to ask us any questions whatsoever, please don't hesitate to contact us or simply complete our Request Form |
|
|
